[TenTec] Omni VI plus to computer hookup
k8mp at aol.com
k8mp at aol.com
Thu Jan 25 20:54:20 EST 2018
"All's well that ends well"
Sent from AOL Mobile Mail
-----Original Message-----
From: Jim Goudie <jagoudie at comcast.net>
To: Ten-Tec List <tentec at contesting.com>
Sent: Thu, Jan 25, 2018 02:40 PM
Subject: Re: [TenTec] Omni VI plus to computer hookup
Hello…
Reporting back… I purchased one of the Icom CI-V USB programming cables. Using the 1/8” serial port on the Omni VI, it worked perfectly on the second try…
For the sake of humility and humor, I’ll explain. The first time I tried the cable, I could tell it was doing something, but not what I wanted. After a couple tries I realized that it was keying the transmitter on and off in rhythm with the 2-second polling rate. Curious.
I discovered I had messed up in two ways… eventually:
1. As I shut everything down in frustration… about midnight, I noticed the label on the plastic bag that the cable came in. Lo and behold, I needed to install drivers on the computer! Who would think!? :-)
2. Then, the next morning, with drivers installed, I went to plug the cable back into the rig, by touch, not by sight. I was feeling around and discovered that the first time I had plugged it into the PTT jack! No wonder…
Now… it works. Sheepishly yours,
Jim AF3Z
Jim Goudie — <a href="mailto:jagoudie at comcast.net">jagoudie at comcast.net</a>
610 Kraybill Church Rd
Mount Joy, PA 17552
_______________________________________________
TenTec mailing list
<a href="mailto:TenTec at contesting.com">TenTec at contesting.com</a>
<a href="http://lists.contesting.com/mailman/listinfo/tentec" target="_blank">http://lists.contesting.com/mailman/listinfo/tentec</a>
More information about the TenTec
mailing list