[TenTec] I surrender

Carl Moreschi n4py3 at earthlink.net
Sun Mar 4 09:52:20 EST 2018


They are probably keying with RTS or DTR and not using an Icom command.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 3/4/2018 8:12 AM, k8mp at aol.com wrote:
> Hmmm...
> I run MMTTY and FLFigi on that same PC over the same connection and they
> key the Omni VI Plus fine.
>
> Those work but WinLink/Winmor does not, so it's gotta be something in
> the program or a setting in it.
>
> Later, Joe, K8MP
>
> Sent from AOL Mobile Mail
>
>
> -----Original Message-----
> From: Carl Moreschi <n4py3 at earthlink.net>
> To: k8mp <k8mp at aol.com>
> Cc: tentec <tentec at contesting.com>
> Sent: Sun, Mar 4, 2018 06:54 AM
> Subject: Re: [TenTec] I surrender
>
>
> I don't think the Omni VI implemented that command.
>
> Carl Moreschi N4PY
> 58 Hogwood Rd
> Louisburg, NC 27549
> www.n4py.com <http://www.n4py.com>
>
> On 3/4/2018 12:06 AM, k8mp at aol.com <mailto:k8mp at aol.com> wrote:
>  > They're talkin' Carl. The rig accepts the mode and QRG commands from the
>  > PC but apparently it doesn't accept the command to xmit.
>  >
>  >
>  > Sent from AOL Mobile Mail
>  >
>  >
>  > -----Original Message-----
>  > From: Carl Moreschi <n4py3 at earthlink.net <mailto:n4py3 at earthlink.net>>
>  > To: Discussion of Ten-Tec Equipment <tentec at contesting.com
> <mailto:tentec at contesting.com>>
>  > Sent: Sat, Mar 3, 2018 11:12 PM
>  > Subject: Re: [TenTec] I surrender
>  >
>  >
>  > There's 3 things that have to match.
>  >
>  > Baud rate (probably 1200 but might not be )
>  > CIV address (should be 04 )
>  > Correct comport number.
>  >
>  > If all those match it will work.
>  >
>  > Carl Moreschi N4PY
>  > 58 Hogwood Rd
>  > Louisburg, NC 27549
>  > www.n4py.com <http://www.n4py.com> <http://www.n4py.com>
>  >
>  > On 3/3/2018 10:32 PM, Joe Papworth via TenTec wrote:
>  > > Gents,
>  > >
>  > > <div>I threw in the towel on making WinLink and Winmor work with my
>  > Omni VI Plus. I have WinLink working over our local Mesh network and I
>  > was hoping get it working on HF but no dice.
>  > >
>  > > Thank you Carl, Rod, Greg, and others who weighed in.
>  > >
>  > > Joe, K8MP
>  > >
>  > > Sent from AOL Mobile Mail</div>
>  > > _______________________________________________
>  > > TenTec mailing list
>  > > TenTec at contesting.com <mailto:TenTec at contesting.com>
> <mailto:TenTec at contesting.com <mailto:TenTec at contesting.com?>>
>  > > http://lists.contesting.com/mailman/listinfo/tentec
>  > >
>  > _______________________________________________
>  > TenTec mailing list
>  > TenTec at contesting.com <mailto:TenTec at contesting.com>
> <mailto:TenTec at contesting.com <mailto:TenTec at contesting.com?>>
>  > http://lists.contesting.com/mailman/listinfo/tentec


More information about the TenTec mailing list