[TenTec] Omni VI+ 100 hz off exactly on readout

[Barry N1EU]

Good advice from Don.  Also, don't adjust anything until you first adjust
the BFO oscillator trimmer capacitors, described in the manual under TX
Audio Board.

Master oscillator adjustment is described here:
http://tentecwiki.eqth.net/doku.php?id=563calibrate

73, Barry N1EU

On Mon, Mar 12, 2018 at 1:05 PM, Don Rasmussen via TenTec <
tentec at contesting.com> wrote:

>
>
> Be sure to check that the difference is seen on all bands, band crystals
> also change sometimes...
> de Wb8yqj Don
> My 25 year old Omni VI+  has gradually crept up 100 hz on the readout. I
> have a
> new TCXO that I recently purchased but I would like to make an adjustment
> to
> bring the BEAUTY UP 100hz so it will read 3.925 instead of 3.924.9 when it
> is
> in fact receiving on 3.925.
>  Thanks and 73, John, K5PGW
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>