[TenTec] Paragon 585
Bwana Bob
wb2vuf at verizon.net
Sun Sep 23 22:05:13 EDT 2018
Hi, Snowy,
SMA is probably too big. SMC, SMB, MCX or MMCX connectors might work.
However, the vast majority of PLL problems with the Paragon are poor
solder joints or VCO misalignment. Most people reflow the solder joints
on both boards.
73,
Bob WB2VUF
On 9/23/2018 11:01 AM, ROLAND HOWELL via TenTec wrote:
> Has anybody ever changed the plug in mini coax connectors on the PLL ref/major and minor loop pcb,s.Reason for asking is that it seems that the centre contacts are very hit and miss.I had been looking at the bigger versions as fitted to the Omni and others, they are more substantial or changing them for sma types.Just a thought in the hope that may be the answer to my PLL out lock message.cheersSnowy
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the TenTec
mailing list