[TenTec] Ten-Tec Argosy II S meter not working

[MadScientist]

Not likely anything in the PTO would cause the S meter to fail to work.

The S meter plugs into the IF/AF board via connector 17. It is possible you pulled this loose when you were working on the PTO.

Does the meter indicate anything in transmit?

Gary

> On Apr 10, 2019, at 9:48 AM, Lysle Anderson via TenTec <tentec at contesting.com> wrote:
> 
> Hello to the group and good day.
> My Ten-Tec Argosy II needed a PTO cleaning and re-greasing. Although I had never attempted this before, there is lots of information available as to it is to be done. All went well and the PTO now works fine but the S meter now does not work. I re-checked the connections that I had previously unhooked and all seems correct. Is it possible that I forgot something in the PTO itself even though it itself seems to work OK? Thanks in advance.
> Lysle H AndersonVE1BZEKentville, Nova Scotia 
> Canada.
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec