[TenTec] TenTec Titan Meter Lamps

[GARY HUBER]

This one was new old stock from AD0S... it is an export model that I bought from him the year TT brought out their first updated model of the 425 at Dayton. So it is an early version.

________________________________
From: TenTec <tentec-bounces at contesting.com> on behalf of Jim Brown <k9yc at audiosystemsgroup.com>
Sent: Tuesday, April 23, 2019 10:04 PM
To: tentec at contesting.com
Subject: Re: [TenTec] TenTec Titan Meter Lamps

I have three Titans, and meter lamps is something they did differently
over the years. At one point they used 28V lamps, at others 12V in
series. They are undoubtedly labeled, so look at them when you open it up.

FWIW, I replaced all my incandescent meter lamps with low current,
higher voltage to improve life.

73, Jim K9YC

On 4/23/2019 5:55 PM, GARY HUBER wrote:
> The lamps just failed (04/20/19)… both failed so they must be in series, if the circuit is 28 VDC and the lamps are 2 X 12 VDC.

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec