[TenTec] Paragon II meter

[Gary Follett]

I have several of these.

However, before you replace it, remove the plastic front cover of the meter. Then turn the pivot screw gently CCW about 1/4 turn or less. 

Then check to see if it still sticks.

I have fixed over a dozen meters with this issue via this process.

Gary

W0DVN

> On Aug 9, 2019, at 12:35 PM, Mike Golini <mgolini at gmail.com> wrote:
> 
> My SWR/WATT meter on my Paragon II is gone - needle stays in the middle regardless of mode switch position and RF
> 
> Anyone know a suitable replacement or NOS ? The meter movement should show S9 with deflection of 50uA. 
> 
> Any suggestions would be appreciated. 
> 
> Michael J. Golini
> K1SLT
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec