[TenTec] Aragonaut 509 - multipler tuning

[Mike Bryce]

The 6333 is tripled to 19 mhz. You don’t insert this freq

I don’t have the manual in front of me so I can’t tell you where to look for the 19 mhz freq

Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o 

> On Feb 5, 2019, at 2:09 PM, w0ep <w0ep at w0ep.us> wrote:
> 
> 
> I'm working on the alignment of an Aragonaut 509.
> 
> I'm looking at the manual, page 3-10 which talks about
> the 80233 Oscillator board.
> 
> The section labeled "Multipler Tuning", I am having a hard time
> trying to understand the measurement to be made.
> 
> 
> Here is the instruction:
> 
> "Set the oscillator to 10 meters and the frequency to 6333 kHz.
> Peak both the bottom and top slugs in T1 for 19 MHz."
> 
> 
> Where do I measure, or insert, the "injection frequency" of 19 MHz?
> 
> 
> Chris
> w0ep
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>