[TenTec] O2, MOLEX Connector

[pa5mw at home.nl]

I have two 565 in my shack:
One early model ORION, which I successfully upgraded to powerpoles exactly as described I the VE7TK link.

And one 2004 ORION, which offers a different PCB layout at the Molex , such that the Powerpole upgrade was NOT possible.
Cannot remember the why exactly.

73
Mark PA5MW


-----Original Message-----
From: TenTec <tentec-bounces at contesting.com> On Behalf Of Mike, K9UW
Sent: Thursday, October 17, 2019 14:38 PM
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Cc: gunnerjuulnyholm at me.com
Subject: Re: [TenTec] O2, MOLEX Connector

Here is the info you need, Gunner.
http://www3.telus.net/ve7tk/Orion_Powerpole.pdf

73,

Mike, K9UW
Amherst, WI

> On Oct 17, 2019, at 3:00 AM, OZ6NF/Gunner via TenTec <tentec at contesting.com> wrote:
> 
> First: Many thanks for all  your advices concerning shift of battery. Piece of cake, and my O2 is as stable as ever.
> 
> Second: The O2 went dead. Turned out to be the MOLEX power connector has burned out.
> I happen to have Anderson 30 A PowerPoles and PTFE insulated AVG 16 stranded wire in stock, and would like to make a new power connection to the O2 by shifting the MOLEX connector. It appears necessary to loosen the back plate of the O2 in order to work on the soldering of the MOLEX on the board just inside the back plate.  New territory for me.
> 
> I would appreciate
> ° procedures or experience on how to do the shift of the MOLEX, ° 
> hints ° pitfalls
> 
> Vy 73
> Gunner/OZ6NF
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec