[TenTec] Eagle & Heath SB-200 Amp

[Radio AI2Q]

Sometimes a short delay has to be added between the time your rig is 
keyed and the amp is keyed. To be clearer, the amplifier must be keyed 
first, to ensure its T/R relay is connected to your antenna before RF is 
applied. Delays are typically in tens of milliseconds.

Vy 73, /AI2Q/, Alex


On 2/25/2020 9:13 AM, Richard Wagner via TenTec wrote:
> I’ve never dealt with an Amplifier before. A friend gave me a Heath SB-200. It appears I have to make a connection between the AMP KEY terminal of the ACC-1 accessory connector and the AMP KEY Socket of the amp. A plug for the socket and short jumper wire were included with my Eagle. This appears to be all that is needed. I’ll connect from the Eagle to the Amp then through my Antenna Tuner to the Antenna. Does this seem OK?
>
> Rich Wagner
> K4MZE
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec