[TenTec] OMNI VI plus
David Propper
k2dp at charter.net
Tue Sep 29 21:03:38 EDT 2020
Bob,
Another suggestion, use liquid De-Oxit as your contact cleaner. It has a needle dropper dispenser. As someone else mentioned, avoid spraying contact cleaner if possible, however, the same cleaner is available in a spray can. I believe that someone else also mentioned that you should check the connections for each of the sub-miniature coaxial cables that interconnect between various boards. Apply the liquid De-Oxit cleaner to the sub-miniature connectors, both the outer shell (ground) and the center pin of the connector.
Best of luck ! Hope you find the problem.
73 and take care,
Dave, K2DP (St. Louis, MO)
> On Sep 29, 2020, at 7:20 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
>
> Jim:
>
> How long has it been since the connectors internally were cleaned? Likely never. So it is time to unplug each one, scrub the male pins with a Q-Tip with contact cleaner applied and plug it back in. Do NOT spray anything into the radio.
>
> 73
>
> Bob, K4TAX
>
> On 9/29/2020 6:37 PM, jbrannig via TenTec wrote:
>> My OMNI died suddenly.No signals on receive and no RF out on transmitEverything else functions as normal..ie. frequency read out, audio noise, bandchange...Any ideas on where to start looking?Tnx es 73JimSent from my Galaxy Tab® A
>> null
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list