[TenTec] Eagle IF output

[dukeshifi]

I answered my own question. This is indeed an IF output and, with the analyzer gain cranked way up, I get a spectrum of the Eagle. However, I get a constant peak 25 KHz above the 9.000 MHz centerline. 

Also, the passband tuning is not centered. Does anyone know the adjustment for this?

Gary

W0DVN

> On Aug 7, 2022, at 6:21 PM, dukeshifi <dukeshifi at comcast.net> wrote:
> 
> I have a late Eagle. It has a coax going from the RX-TX board to an RCA jack on the back. The cable plugs into TMP jack 15. This is not shown on the Eagle schematic I have.
> 
> Is this an IF output? If so, I cannot seem to view its output with my spectrum analyzer tuned to 9.0 MHz center.
> 
> Any help?
> 
> Gary
> 
> W0DVN
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec