[TenTec] TenTec Items FS
gerd Groos
df9ts.cw at gmail.com
Fri Sep 16 17:39:27 EDT 2022
Ken,
I just got the filter. Thanks again and all the best to you!
Gerd DF9TS
> On 14. Jul 2021, at 22:50, Ken, W8EK <KenW8EK at gmail.com> wrote:
>
>
> Crystal Filters, Crystal, Omni and
> Century 21 parts, and more For Sale:
>
> .
>
> Crystal Filters for TenTec Rigs For Sale:
>
> I have a couple crystal filters for TenTec
> rigs for sale. All work fine and look fine.
>
> The following filters are used in TenTec rigs
> in the 9 MHz IF. This includes the Omni
> series A, B, and C; Omni V, Omni VI,
> Argosy, Paragon, and Orion I.
>
> While these will fit the original Orion,
> they do not fit the Orion II.
>
> The following are actual TenTec crystal filters:
>
> TenTec 217 filter
> 500 Hz wide, CW filter, $79 SOLD
>
> TenTec 218 filter
> 1800 Hz wide, Narrow SSB or wide CW, $79
>
> .
>
> Crystal for 12 m for Omni series A or B
>
> The early Omni series (A and B) did not include
> the WARC bands, but they do have an "Aux"
> position that can be used for the 12 meter
> (24.8 MHz) WARC band, by simply plugging in
> a crystal.
>
> This is the crystal you need to do this.
>
> It works fine. Only $18.
>
> .
>
> TenTec Omni 546 Parts For Sale:
>
> I have a TenTec Omni D, Series B, Model 546 that I
> am parting out.
> Many, probably most, of the parts are compatible
> with most all of the Omni series A, B, and C rigs.
>
> PTO, digital readout and final module are
> gone, but many, many parts are still available.
>
> Available:
>
> Metal parts:
> Front panel
> Rear panel
> bezel
> left and right sides
> main chassis
>
> Preamp assembly w/ metal work
>
> Side plastic pieces that go between top
> and bottom cover
>
> 3 switch module on left side
>
> S Meter
> S meter light and socket
>
> Plastic PCB Holders
>
> Offset pot
>
> Drive pot
>
> Selectivity rotary switch
>
> Mode switch
>
> Mic jack
>
> Headphone Jack
>
> Internal PC boards:
> SWR / TR
> T/R Relay
> RF Trimmer
> VFO Mixer / Oscillator
> Low Level Driver
> 8 Pole Crystal Filter
> Audio Amp
> Low Pass Filter
> SSB Generator
> Attenuator
>
> Maybe a few things not listed.
>
> Please let me know what you need.
>
> .
>
> TenTec Century 21, Model 570 Parts For Sale:
>
> I have parts from a Century 21, model 570, available.
> Most of these parts should also fit the Model 574
> digital version.
> Hopefully these parts will let several rigs live again.
>
> PTO, power supply parts, and final module are gone.
>
> Available Parts:
>
> Metal parts:
> Inside front subpanel
> Rear Panel
> Both left and right sides
> Main chassis
>
> Large PS Filter Cap
>
> Large Tuning Knob
> Bandswitch knob
>
> Headphone Jack
>
> 3 pilot bulbs and sockets
>
> 12.500 Crystal
>
> Circuit Board Assemblies:
> Low level driver 80354
> Control board 80355
> Audio Power Amp 80357
> Front end board 80359
> Low Pass Filter 80360
>
> Please let me know what you need.
>
> .
>
> TenTec Original Boxes
>
> These are original boxes only,
> and do not include the equipment.
> Inserts are included.
>
> TenTec AC-5 QRP Antenna Tuner $8
> TenTec KR-2 Keyer Paddles $5
> TenTec 255 PS $20
> TenTec 561 Corsair $30
> TenTec 604 Keyer Paddles $5
>
> These are original boxes only.
>
> .
>
> I also have many other accessories available such as many
> different types of microphones, HTs, VHF and UHF rigs, HF
> and VHF/UHF antennas, connectors, miscellaneous accessories,
> etc.
> Just too many to list here. Please e-mail your requests.
>
> .
>
> Prices do not include shipping from Florida.
>
> Thanks.
>
> 73,
>
> Ken, W8EK
>
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone (352) 732-8400
>
>
>
> .
>
>
>
>
> .
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list