[TenTec] orion 2 / encoders

[Bob, W3IDT]

Mouser Electronics had (or used to have) an Orion II upgrade kit.
It included caps for the A9 power board, the battery, and a bunch of 
encoders. Can't find a single part number now for the package.

But the encoders are p/n 652-PEC11L 4225FS0015 as best I can read the 
small print.

The caps were used by K2KP to update my A9 board, though I seem to have 
some leftover as well. I have not used the encoders, though my RIT/XIT 
encoder doesn't work.

Bob, w3idt

.......
. Robert F. Teitel, W3IDT
.
. w3idt at comcast.net
. w3idt at arrl.net
........

On 1/22/2023 7:01 PM, dukeshifi wrote:
> OK Ralph.
> 
> Still, it’s always good to hear from you.
> 
> 73
> 
> Gary
> 
>> On Jan 22, 2023, at 6:00 PM, Ralph Covington <ralph.covington at hotmail.com> wrote:
>>
>> Thanks Gary, but I’ll pass this time. Sorry to have taken up your time. My Orion II and Herc II are fb now. I’m 85 and I think they’ll be okay until I make the long trip.
>> vy 73, de Ralph in Reno. 🖖. …_._
>>
>> Get Outlook for iOS<https://aka.ms/o0ukef>
>> ________________________________
>> From: TenTec <tentec-bounces+ralph.covington=hotmail.com at contesting.com <mailto:tentec-bounces+ralph.covington=hotmail.com at contesting.com>> on behalf of dukeshifi <dukeshifi at comcast.net <mailto:dukeshifi at comcast.net>>
>> Sent: Sunday, January 22, 2023 2:31:05 PM
>> To: Discussion of Ten-Tec Equipment <tentec at contesting.com <mailto:tentec at contesting.com>>
>> Subject: Re: [TenTec] orion 2
>>
>> There is a guy on eBay selling some he claims are original. They ar en to but they look to be correct other than the wrong color and brand.
>>
>> I have some Bournes encoders that are new. I modify them because they come with detents, which you do to want. It takes 5 to 10 minutes each for me to do each so I need to get $15 each for them.
>>
>> Once you go to the work to remove the encoder board, you might as well replace all of the encoders because it is a lot of work to get this board out. Also, you need a really good solder puller to get the old ones off the board. I generally cut the leads off the old encoders and remove each lead one-at-a-time, then clear the holes with the solder puller. Do NOT tug very hard on the pins, make sure the solder is fully melted or you will pull traces off the board and these are almost impossible to repair.
>>
>> Let me know if you want mine or go searching for the ones on eBay.
>>
>> 73
>>
>> Gary
>>
>> W0DVN
>>
>>> On Jan 22, 2023, at 3:31 PM, Peter <prheide at wxs.nl> wrote:
>>>
>>> I need some encoders (multi, cut /pbt/bw, main af , sub af , rit/zit) for my TT orion 2.Does anybody know the brand or type and where to get them ?
>>> Not all of them are broke, but some spare ........
>>>
>>> best regards Peter  PD0FGQ
>>>
>>> --
>>>         Disclaimer
>>>
>>> De informatie in dit e-mailbericht, inclusief eventuele
>>> meegezonden bestanden,is uitsluitend bestemd voor de geadresseerde.
>>> Openbaarmaking aan derden, in welke vorm dan ook, is alleen toegestaan
>>> na toestemming van P.R.van der Heide.
>>> Ontvangt u dit bericht maar bent u niet de geadresseerde
>>> van deze e-mail, dan dient u het bericht definitief te verwijderen
>>> uit uw systeem en bestanden. P.R. van der Heide aanvaardt geen
>>> aansprakelijkheid voor schade, van welke aard ook, die verband houdt
>>> met risico’s verbonden aan het elektronisch verzenden van berichten.
>>> P.R.van der Heide/First Media Products/Certified Pro Audio Engineer
>>>
>>>
>>>
>>>      _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com <mailto:TenTec at contesting.com>
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftentec&data=05%7C01%7C%7Cc9747cd9af2840d4992308dafcc8d20e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638100236702920294%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBy1tUE6CpalEatPv6nTYTeXAdTJIQP1wAVfHJwE4C8%3D&reserved=0
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com <mailto:TenTec at contesting.com>
>> http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec