[TOEC] Fw: [WT-support] Serial numbers in multi/multi SAC-contest

[Kenth Johansson]

Hej,
Bifogade mail skrev jag i min upprördhet efter SAC testen till Win-Test reflektorn.
Skaparen F6FVY svarade omedelbart att det inte finns något krav i SAC regler punkt 6 på CER hemsida om separata serienummer per band i multi/multi. Andra tester har det i reglerna men inte SAC. I punkt 6 står inget om separata serier per band i multi multi men det finns en allmän skrivning i punkt 10 om att loggen måste vara i original och korrekt.


Ett antal av de första ca 250 QSO i testen har +1, +2 i loggen mot vd som är sänt. Efter 250 QSO bröt vi ner nätverket och fortsatte på respektive band PC. Vi hade inte kört något på 80 o 10 vid den tiden så där är alla nr OK men vad gör vi med de som är fel? I stridens hetta med hög rate i början märkte vi inte att loggningen var fel förrän efter ca 250 qso!!! Vi körde ca 2300 QSO ( se annat mail)

Kenth
sm6dyk


Bifogar svar från F6FVY 


----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Sunday, September 17, 2006 6:04 PM
Subject: Re: [WT-support] Serial numbers in multi/multi SAC-contest


> Hi Kenth
> 
> Kenth Johansson a écrit :
> 
> > We in SK6M contest team worked the SAC CW contest in multi-multi class 
> > this weekend. We thought that we should get separate serial numbers for 
> > each band when we choosed multi/multi in the setup window but that was 
> > false.
> 
> The SAC contest implementation (Scandinavian side) in WT follows the 
> rules found here :
> 
> http://www.sk3bg.se/contest/sacsc.htm
> 
> The "6. Contest exchanges" section *doesn't mention* that numbering per 
> band is *allowed*.
> 
> That's why a "common" numbering for all bands is implemented in WT. Some 
> other contest rules allow a numbering per band (King Of Spain for M/M, 
> CQWW WPX for M/S and M/M, RDXC for M/S and M/M etc...) and is 
> implemented in WT.
> 
> 73
> 
> Larry - F6FVY
> 
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

----- Original Message ----- 
From: Kenth Johansson 
To: support at win-test.com 
Sent: Sunday, September 17, 2006 5:42 PM
Subject: [WT-support] Serial numbers in multi/multi SAC-contest


We in SK6M contest team worked the SAC CW contest in multi-multi class this weekend. We thought that we should get separate serial numbers for each band when we choosed multi/multi in the setup window but that was false. We got the same serial row for all bands and began to run into a disaster when the program sent a number and logged another serial number due to the fact that another operator in the network hit the logging + command first. We had to stop the contest and disconnected the ethernet network so each PC became stand alone. That way we loosed all info, mult checks, rate and so on. 

We read the manual up and down and could not find any info about separate series for each band in multi multi. 

What was wrong in our first setup?? N6TR DOS programme which we have used before could easy run separate serial numbers for each band for multi/multi in the network. The reason for us to change program was that we wanted Windows instead of the complicated DOS setup program.

Kenth
sm6dyk



--------------------------------------------------------------------------------


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support