Topband: re: Elevated Radials

[John Devoldere (ON4UN)]

If you compare the "on the ground" radial situation with the elevated radial
situation, you must phsysically remove the on the ground radials while doing
the test with the elevated radials. If not you are comparing "on the ground"
radials with elevated radials over a ground screen .

73

John, ON4UN




--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com