Topband: Need advice: Hy-Tower on 160, and radials

[Dan Flaig, K8RF]

Re; Hy-Tower 160 operation

I beleive that Hy-Gain made two different "add on' kits for the Hy-Tower
for 160 operation.

The first one was the base loading coil.

The second arrangment was a trap, that could be mounted at the top of the
tower portion of the Hy-Tower, that had an "L" wire attached for 160. This
is the set up at Jody' VP5JM's QTH.  I don't know if this trap version kit
is still available, but you could certainly build your own trap if not.

73
Dan K8RF



--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com