Topband: Non-inductive resistors

[Michael Tope]

Joe,

Have you tried the ceramic composition resistors that Digi-Key
sells. I think they have them in 1 and 2 watt varieties. They are
fairly cheap and available in small quantities.

Mike, W4EF..................

> Folks,
> can anyone recommend a source for relatively inexpensive non-inductive
resistors.  I have exhausted my supply.  I need  ~ 6 or so resistors in the
450-500 ohm range (1 watt or better) for my beverages.  They are hard to
single source and very expensive even in lots.  In addition, many
manufacturers say they are non-inductive but that is not necessarily true at
1.8 MHz.    Carbon composition seem to be the only non-inductive resistors
at 2 MHz.
>
> Thanks in advance