Topband: Loop for RX

[Steve Lawrence]

At my QTH, the coaxial loop has worked wonders on both 160 and 80. A 
preamp is a must. I also use an RF limiter to protect the transceiver 
RX only input during TX. Setting aside the cost of the preamp, limiter 
and small TV rotator, the coax loop is very inexpensive and easy to 
build. Without the RX loop, a Q with JT1CO and several EU stations 
would simply not have been possible. S9 noise goes to S5. The front to 
side response is very pronounced. The loop is up about 20 feet and 
about the same distance from my shunt fed tower.

It's worth a try. At least it's worked for me.

73, Steve WB6RSE - Los Angeles