Topband: K9AY Antenna

Ralph Matheny mathenyr at marietta.edu
Thu Jul 27 19:58:36 EDT 2006


Well--when I used the K9AY I had the same problem.  I suspect that the
character of your ground system has changed.  Dry Wx??

I have also found that my Rx antennas, which are mounted in trees and 
enclosed by woods fail to perform properly after the trees "green up" in
the spring.

I now use "flags" to get rid of the first problem (ground dependency) and
find that keeping noise pickup on the coax down is easier than with the
K9AY as a bonus.  I found the K9AY to be a good performer, but very ground
dependent.  When modeled, one sees the antenna you describe if no ground
system is included.

have not figgered out a good way to keep the trees from getting leaves.
Since the antennas are "trespass" antennas, I think I won't explore that
issue.

Ralph Matheny
K8RYU
207 Gibbons Place
Marietta Ohio  45750







More information about the Topband mailing list