Topband: Shunt feed short tower

Rick N6PE n6pe at pacbell.net
Wed Jun 7 12:48:20 EDT 2006


This may be of general interest.

Many years ago I shunt fed my 35 foot tower with an ABT-34 tribander on top.
The tower is a tubular crank up.  I ran a wire off from about 2/3s up at a 
45 degree angle.
I could match it, however, even with a pretty heavy shorting strap across 
the section joint, the SWR would jump around in the wind.

Rick, N6PE 



More information about the Topband mailing list