Topband: RG-6 Connectors

[David Raymond]

On 23rd May, Mike wrote...

> Are those of you using RG-6 for phasing lines in RX arrays using F
 connectors, or some other connector?

************************

Hi Mike,

Back about a year ago, or more, there was a "The Doctor Is In" segment of
QST magazine that described a way to utilize standard PL-259 plugs --- plus
RG-59 reducers --- on RG-6 coax cable.

The trick was to find a way to ensure a good electrical connection to the
outer shield --- that nasty aluminum foil stuff, & all....



I believe F connectors are clearly the best choice for RG-6 cable since they
are made specifically for that application.  They are easy to install,
inexpensive, mechanically secure, and much more compact than UHF connectors.
There are several varieties of the F connector but generally speaking, there
is an indoor version and an outdoor version (which has somewhat of a seal).
To install an F connector you will need the proper crimping tool (available
at Radio Shack).

73...Dave
W0FLS