Topband: 756 PROIII

[Floyd Sense]

allan1 dejazzd.com wrote:
> Thank you all for your input on the inverted L
> I have the PRO111which has a separate rcv ant input.
> 
> Can I assume that when I hook up another antenna such as an ewe or loop to the receive antenna input, that the received signals on top band will be a a combination of the L and the EWE.
> If so that means that I am not getting the full affect of the EWE. Do I need a separate TR switch for 160? To minimize all the other coax lines from my other antennas coming into the shack, I use a remote coax switch. The above might complicate things since I have a common coax line.
> 
> Any thought would be appreciated
> 
> Thanks
> Allan W2TN
> 
>

That's not the case.  Your Pro III will receive on the antenna 
specified, not both.  You select the receive antenna port by pressing 
the ANT button and holding it down for a second.  The antenna selected 
will change to "1/R", indicating you'll transmit on antenna 1 and 
receive on the antenna connected to the receive jack.  If you normally 
use the "2" antenna for 160, you'll get "2/R" when you hold the button 
down.

73, K8AC