Topband: Modeling Shunt feed in EZ-Nec

[Guy Olinger K2AV]

Model the source as close as you can to where you intend to feed the coax.
In the model, do **NOT** use the model ground as the low part of the shunt
connection, use a third wire.

If you want an extended careful discussion about the traps and foibles of
modeling shunts, would suggest antennaware reflector.

73, Guy.<w5uc at suddenlink.net> wrote:

>
> ... about modeling Shunt Feed in EZ-Nec.
> I'm wondering if the source should be modeled at the base of the tower,
> or up where the shunt lines connect to the tower.
>