Topband: looking for parts

[BRYON PAUL n0ah VEAL]

Can anyone direct to us a shop that carries these items for building a K0FF low band 160M loop we found onm e-ham??
 
160M Version
All you need is 20’(160) or 10’ (80) of the 3/4” aluminum CATV cable, an aluminum conduit TEE* with waterproof gasketed coverplate*, a 9:1 Matching transformer*, tuning capacitor and padders*,coax fitting of your choice*, shrink tubing*, a short piece of 1” PVC waterpipe-slit (gap stiffner), a plastic plug* and rust proof hardware*. The mounting “mast” is a 2 foot piece of 1/2” or larger waterpipe, with 1 foot driven into the ground, or a one foot piece clamped into a ground mounted rotor. Remember, the SLOOP is intended for receive only applications, never transmit into it.  We are looking at putting a copule of low band antennas out back and thought this would be a good antenna to use as a reference- We can get the pipe, this question refers to the electronic parts. Will be mounting on a small rotor in the back yard- making 160M our band choice for the low band season-

73  Anna  W0ANT
     Paul    N0AH
 
w0ant at arrl.net