Topband: Fabricated common mode chokes - Sourcing

ZR zr at jeremy.mv.com
Tue Aug 30 10:30:16 PDT 2011


Did you open up a Cushcraft balun to discover that method? I believe some 
other companies do similar and Teflon wire is used so it doesnt char as does 
THNN.

Carl
KM1H


----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <topband at contesting.com>
Sent: Tuesday, August 30, 2011 10:33 AM
Subject: Re: Topband: Fabricated common mode chokes - Sourcing


>A year or two ago, based on the experience of some hams in the UK who
> found Fair-Rite cores either impossible to obtain or very expensive, I
> did some more experimental work that resulted in designs for
> transmitting chokes that can be wound on a single #31 core, be very
> effective from 80-10M, and handle at least 500W with antennas that have
> reasonably good balance. If the antenna is well balanced the choke can
> handle legal power.
>
> The new designs use bifilar windings -- that is, two conductors taped
> together and wound around the core that function as a parallel wire
> transmission line in place of coax. An alternative design uses more
> turns and covers 160-15M.  These designs were added to my RFI tutorial
> last summer (June 2010). The best of these designs use ordinary "house
> wire", known in North America as THHN.
>
> The tutorial is http://audiosystemsgroup.com/RFI-Ham.pdf
>
> 73, Jim Brown K9YC
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3867 - Release Date: 08/30/11
> 



More information about the Topband mailing list