Topband: Need EZNEC file for 1/4 wave 160 vertical with radial system

[K4SAV]

W0BTU wrote: " The low dipole should be inferior to a 1/4 wave vertical 
at a 25 degree elevation, but my models do
not show that, by any means."


You probably are using a Mininec ground under the dipole.  A low 
horizontal wire over a Mininec ground is a rule violation.  Try using a 
real ground.  Read the EZNEC help file on ground types.

Also a vertical on 160 will have an advantage that does not show on NEC 
plots.  Look up the effects of the Earth's gyro frequency.

Jerry, K4SAV
>
>