Topband: Radials through heavy brush

[Pete Smith N4ZR]

I heard about the same idea from Fred, K1VR, using an 8-f0oot ground 
rod, with a hole drilled in the blunt end and slightly bent to make it 
sneak through the undergrowth better.

73, Pete N4ZR
The World Contest Station Database, at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000

On 8/14/2012 5:36 PM, Pete Michaelis - N8TR wrote:
> Years ago my wife Mary, N8DMM used a 12' piece of 3/8" diameter
> aluminum tubing like a long sewing needle to thread 160 and 80
> meter radials under heavy brush.  It worked very well.  A piece of
> 1/2" tubing was used to splice two pieces together the few times
> we needed a longer "needle"
>
> 73 Pete - N8TR
>
>
>
>
> At 07:27 PM 8/11/2012, Jeff wrote:
>> Another economical and light weight method of pushing wire through brush
>> would be to use a 10' piece of 1/2" PVC or plastic electrical conduit. In
>> the case of the electrical conduit it can be extended by adding multiple
>> pieces together for greater length. It's lite weight and flexible enough to
>> bounce it with one hand over things like roots or stones that might get in
>> the way. If you don't want to carry 10' lengths of plastic pipes around,
>> look in the big box stores or electrical suppliers for threaded push rods
>> made of fiberglass. Typically they come in 4' sections with 4 or 5 in pack
>> that threat one onto the other and are brightly colored. That makes it easy
>> to find in the leaves and twigs.  Just tape your wire on to the end and
>> push.  Autumn is coming, time to get those TB antennas back in the air.
>> W7JW
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>