Topband: Preventing QRM

wa3mej at comcast.net wa3mej at comcast.net
Wed Jan 11 14:02:30 PST 2012



Brian, 

I currently have a very high power line noise (the electric company is trying to find it) that is why I mostly use a techique I call scan and pounce (at my age I cant pounce too hard though) whereby I listen for others to call CQ and pounce on them.  THis helps to eliminate some of the interferance on the bands.  In fact with the S6 raw AC signal in my inverted L... well I wouldnt even being scanning and pouncing without the new Beverage antenna.  I also use other resources out there like the reverse beacons and the PSK reporter and JT65 information on top band.  This allows me to have a more clear picture where to look and when to look there.  Oh before I forget try looking at what N4IS uses, I am guessing he doesnt have room for a Beverage but he still makes the best of what he has by using a Waller Flag.    www.n4is.com 



Jim WA3MEJ 

---------------------------------------------------------------------- 

Message: 1 
Date: Tue, 10 Jan 2012 15:25:58 -0500 
From: Bill Cromwell <wrcromwell at gmail.com> 
Subject: Re: Topband: Preventing QRM 
To: Eddy Swynar <deswynar at xplornet.ca> 
Cc: kd6nrp at earthlink.net, topband at contesting.com 
Message-ID: <1326227158.3225.2.camel at lancelot> 
Content-Type: text/plain; charset="UTF-8" 

On Tue, 2012-01-10 at 14:42 -0500, Eddy Swynar wrote: 
> On 2012-01-10, at 1:43 PM, kd6nrp at earthlink.net wrote: 
> 
> > I run the risk of calling CQ on what appears to be a clear frequency and QRMing a DX station calling CQ or disrupting an ongoing QSO. Any suggestions on how to prevent? 
> > 
> 
> Hi Brian, 
> 
> Simply follow accepted protocol, i.e.: 
> 
> ---LISTEN on & about your frequency of choice for a minute, or two, for any signs of activity; 
> 
> ---Send "QRL?" once, listen, then send "QRL?" again, & listen once more, and finally, 
> 
> ---If you hear nothing back---like "R", "QRL", "QSY",  "DX HR", or "U LID"(!), then it's a safe bet to go ahead & make a a short initial CQ, say, a 3x3 call. If you get no responses from anyone, anywhere, go ahead & make a 3x3 call, twice if you feel it's necessary... 
> 
> If anyone gets on the frequency after you've gone through this process & they chastise you, shame on them...and it does happen legitimately on occasion, too, as guys get all fired-up & distracted by the possibility of working some DX station somewhere, via split mode right on top of you! 
> 
> But it's all part of the game...welcome to Topband! 
> 
> ~73~ de Eddy VE3CUI - VE3XZ 
> 
> _______________________________________________ 
> UR RST IS ... ... ..9 QSB QSB - hw? BK 

Hi


More information about the Topband mailing list