Topband: Need advice for K3 and RX BC AM

[Rick Stealey]

> 
> I have the general coverage module in my K3 and I can report that it works 
> very well on the BC band as well as MW.  I do not have the AM filter but AM 
> still sounds OK.
> 

K3 guys - dont forget you have synchronous AM detection on your K3s.

When in AM mode, hold in the ALT button (right above POWER) and notice the
AM indication becomes AM-S.  Detune the AM slightly and watch the receiver
retune it to zero beat.  Rotate the shift control to switch between LSB and USB.
And for more in depth discussion of any Elecraft subject there is an Elecraft reflector
that gets about 100 postings a day.

Rick  k2XT