Topband: DX-100 adventure - progress

[Charlie Cunningham]

Diodes across the electrolytics ro prevent reverse chargin would probably be
a good idea. 1N4007 1000 PIV, 1 A rectifiers should do nicely.

-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Tom W8JI
Sent: Saturday, December 21, 2013 1:02 PM
To: Charlie Cunningham; 'Bill Cromwell'; 'top Band'
Subject: Re: Topband: DX-100 adventure - progress

> BTW, Biii - tip/suggestion  - for those series-connected electrolytics you
> probably should put a pair of equal value resistors - one across each 
> series
> capacitor, as the leakage currents will not be equal in each capacitor in
> each series string and the DC voltage won't divide equally across each
> capacitor unless you put individual "bleeder" or "swamping" resistors 
> across
> each cap in the series pair to equalize the DC across each capacitor in 
> the
> series!

It is worse than that.

With a single bleeder for two series capacitors, the capacitor with the 
least capacitance will always be reversed charged upon every power down. So 
even you have equal voltages by equal leakages, you have to add a parallel 
diode or the discharge will reverse charge the cap with the lowest 
capacitance value. 

_________________
Topband Reflector Archives - http://www.contesting.com/_topband