Topband: Verifying integrity of 75 ohm coax.

[Jim GM]

You Flood it with Stuf like this
http://www.amazon.com/Other-Dielectric-Waterproofing-Filler-STUF/dp/B004QPN14C


Fi you do not take care of moisture coming in from the out side it will
oxides your connections or solder joints so you coat
the OUTSIDE with PETROLEUM JELLY Hospital grade.

In a bind you can use PETROLEUM JELY aka VASELINE, it will in time dry out
and needs to be re-applied.  Remember to
wrap electrical tape over it very loosely the apply more tape so that the
Vaseline does not OOOOSE out.

DAH !!!!!!!


On Tue, Nov 26, 2013 at 11:11 AM, Jim GM <jim.gmforum at gmail.com> wrote:

> You do not flod the inside DAH! Coat the darn stuff on the ouside DAH!
>
> --
> Jim K9TF
>



-- 
Jim K9TF