Topband: Are stacked verticals feasible?

Fri Sep 6 23:03:05 EDT 2013

Thanks, Tony

Yes, that's the one!  I was pretty sure that it was published by CQ, but I
was having a "senior moment" and couldn't remember Paul's last name! J

73,

Charlie, K4OTV

From: Anthony Scandurra [mailto:anthony.scandurra at gmail.com] 
Sent: Friday, September 06, 2013 10:52 PM
To: Mike Armstrong
Cc: Charlie Cunningham; ZR; <topband at contesting.com>; Shoppa, Tim
Subject: Re: Topband: Are stacked verticals feasible?

Mike,

This is the book.

http://store.cq-amateur-radio.com/Detail.bok?no=26

73, Tony K4QE

On Fri, Sep 6, 2013 at 10:41 PM, Mike Armstrong <armstrmj at aol.com> wrote:

Carl and Charlie,
I am not sure it would even be close to practical or even doable, but I
remember seeing an old book on verticals written by a prior Navy Captain, I
believe.  He had a very interesting design for what WE would, today, call a
collinear that was 3/4 wave length tall on 20 meters..... it was, in reality
what looked like half of a double-zepp antenna in a vertical orientation. It
intrigued me that it was like a half wave stacked on top of a 1/4 wave
worked against ground (normal radial field). The interesting part was how he
used a "skirt" around the "middle" quarter wavelength portion to produce the
the in-phase relationship with the physically lower 1/4 wave.

You guys may already know the design I am talking about.  I saw that book a
long time ago, like back in the late 60's I think..... maybe early 70's. I
was considering trying to find the article or book whenI was looking for a
better vertical for my winlink node on 20 meters..... the one I have been
talking about.  However, I tried the 5/8ths first because I knew how to
build one without having to possess any special instructions.  It was so
successful, that I completely forgot about the "collinear."  On the other
hand, this discussion reminded me of that book and how author "raved", a
little anyway, over its performance.  I remember that the height of the
finished antenna for 20 meters was something very close to 50 feet...... and
that is not much taller than a 5/8ths..... maybe 7 or 8 feet taller.  So on
20 it is very doable and, supposedly, it has some reasonable gain for the
effort.  I would like to find the book because it described a good way to
make that all-important s
 kirt that got the phase correct between the upper half-wave and the lower
quarter-wave sections.  Due to its relatively tall structure, it probably
wouldn't even be "possible" to build one for 160..... at least not by most
of us.  It would be interesting to see if it has the same "problem" that Tom
was referring to for the 5/8ths..... "too low" radiation angle.  I know it
isn't supposed to have that secondary lobe that a 5/8ths has...... So maybe
it would be an improvement ..... IF it was even possible to build one.  That
would be one tall structure on 160.... LOL LOL. Still, for someone needing
an omni antenna with some gain on the higher HF bands, it might be a decent
answer.  Never built one, so I really don't know if it really works or not.
Although, as I said, that author was a Navy Captain whose job was designing
some of the shipboard antenna systems, like the NORD and some other odd
ducks.... Well, "odd" to those who don't have to build low loss, low band
antennas on
  a floating "postage stamp."  I know, I know, you might have trouble
thinking of something the size of an Aircraft Carrier being referred to as a
floating postage stamp, but if you have spent any time at sea on a "big
deck," you know exactly what I mean by that statement...... he he he he.  I
really should remember his name, darn it..... with all the time I spent on
ships at sea working with his designs, it is really sad (bad?) that I don't
remember his name...... Paul "something?"  I'll find out..... lol

Mike AB7ZU

Kuhi no ka lima, hele no ka maka

On Sep 6, 2013, at 19:03, "Charlie Cunningham"
<charlie-cunningham at nc.rr.com> wrote:

> Well, Carl
>
> You just proposed a total height of 3/4  wavelength, it seems. Do you have
> that much height?
>
> Charlie, K4OTV
>
> -----Original Message-----
> From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of ZR
> Sent: Friday, September 06, 2013 9:26 AM
> To: Shoppa, Tim; topband at contesting.com
> Subject: Re: Topband: Are stacked verticals feasible?
>
> Look at it as 2 ground planes with the lower feed point 1/4 wave above
> ground along with its elevated radials which should make it pretty much
> ground independent according to what has been published on here and
> elsewhere.
>
> The second ground plane would be identical with 1/4 wave spacing from the
> top of the lower antenna or a 1/2 wave between feed points.
>
> Then I would think that the ground conductivity at the reflection point
> would be the only concern as far as efficiency and gain??
>
> If installed as vertical dipoles then there would also have to be
additional
> spacing between them.
>
> I would think that at 6-12' spacing from the tower it would minimize
> interaction on 160 or 80?
>
> Does anyone on here have EZNEC and can plot this?
>
> Carl
> KM1H
>
>
>
> ----- Original Message -----
> From: "Shoppa, Tim" <tshoppa at wmata.com>
> To: "Carl" <km1h at jeremy.mv.com>; <topband at contesting.com>
> Sent: Thursday, September 05, 2013 10:30 PM
> Subject: Re: Topband: Are stacked verticals feasible?
>
>
>> Isn't this a "Vertical dipole"? Two quarter wave radiating elements? And
> tower behind it will be some kind of reflector/director depending on
height.
> The radials seem unimportant if thought of this way.
>>
>> Tim N3QE
>> ________________________________________
>> From: Topband [topband-bounces at contesting.com] on behalf of Carl
> [km1h at jeremy.mv.com]
>> Sent: Thursday, September 05, 2013 9:17 AM
>> To: topband
>> Subject: Topband: Are stacked verticals feasible?
>>
>> Assuming that sufficient tower height was available, guy wires are
> insulated
>> or broken up into short non-resonant sections. Tower face is 12 or 18".
>>
>> Start at 1/4 wave up with a 1/4 wave ground plane with radials sloping at
>> about 45 degrees. The vertical wire is 6-12' away from the tower face.
>>
>> Then a 1/4 wave (or 1/8) up install a duplicate.
>>
>> What does EZNEC say about this?
>>
>> With the different spacings?
>>
>> Effect of starting lower and how low before there are ground related
>> problems?
>>
>> Phasing with coax or a LC network?
>>
>> Switching in a delay line to tilt the lobe up a bit?
>>
>> Curiosity got the cat!
>>
>> Carl
>> KM1H
>>
>>
>>
>>
>> _________________
>> Topband Reflector
>> _________________
>> Topband Reflector
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1432 / Virus Database: 3222/6141 - Release Date: 09/05/13
> _________________
> Topband Reflector
>
> _________________
> Topband Reflector
_________________
Topband Reflector