Topband: tool for install radials

[john]

thanks,,,exactly what I want and need, cheap and simple    73 john w8wej
On 12/9/2014 18:51, Gary and Kathleen Pearse wrote:
> Hi John. Find a piece of wood, maybe a 2x4 and saw a slot in one end width-wise deep enough to firmly hold a partially inserted staple without it bending. Push or drive with a hammer against the 2x4 and force the staple into the ground over the wire flush with the end of the wood. Remove the wood (might need to tip sideways to release the staple if it’s tight in the slot), turn the wood 90 deg, and push down again to finish implanting the staple. Might work, never done it.
>
> 73, Gary NL7Y
>
>> is there a simple , not overly expense tool to set land scape staples while standing??   at 73, I do not want to go through  being on my hands and knees driving the staples in with a hammer.
>> thanks   john w8wej
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5577 / Virus Database: 4235/8707 - Release Date: 12/09/14
>
>
>