Topband: Radial Question
Charlie Cunningham
charlie-cunningham at nc.rr.com
Mon Jan 6 17:39:11 EST 2014
Makes sense and agrees with my experience, Gary! BTW, I have worked Alaska
from here in Raleigh with my 2-elevated radial Inverted L. Don't recall
off-hand if it was you, I worked.
73,
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Gary and
Kathleen Pearse
Sent: Monday, January 06, 2014 5:14 PM
To: topband List
Subject: Re: Topband: Radial Question
I'd run a test wire under the house and connect it to the rig. Listen for
noise. Then connect to house ground and see if noisy. Compare that with each
existing elevated radial for QRN.
Here in Fairbanks anything through the home or grounded to the house or
tower on 160 is worse than my ungrounded elevated radials. One elevated
radial (of 8) near the power line is the noisiest. I disconnect it when it
gets bad.
73, Gary NL7Y
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
More information about the Topband
mailing list