Topband: Feedpoint of short RX vertical

[dl8yhrfrank--- via Topband]

hi luc
so you use a hi z rx arrya and you have matched the 7m long radials with a coil in resonaze?
VY 73
frank
 

 



-----Ursprüngliche Mitteilung----- 
Von: luc kerkhofs via Topband <topband at contesting.com>
An: topband <topband at contesting.com>
Verschickt: Sa, 7 Jun 2014 9:13 pm
Betreff: Topband: Feedpoint of short RX vertical

 
 
 
Hello, 
  
trying to improve my RX setup, I have a question . 
  
When feeding short RX verticals with a coil and resistor in series, does it make  
sense to decouple the feedline 
at the feedpoint with a braid breaker ? 
  
73 
Luc 
ON4IA 
_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband