Topband: New RF interference killing RX at my QTH
Garry Shapiro
garry at ni6t.com
Sat Nov 8 15:51:06 EST 2014
I bought a surplus LORAN square loop years ago. Designed for 100 kHz, it
was easily converted to 1.83 MHz with a single capacitor. I mounted it
to an old car's roof using ski racks and 2x4's and it has a very deep
null perpendicular to the plane of the antenna. The loop is about a
meter on a side. It draws stares but it works well. Dunno where you
might find one but you can search for LORAN loop or similar.
Garry, NI6T
On 11/8/2014 9:33 AM, Goldtr8 (KD8NNU) wrote:
> Dear Topband Group,
>
> I need to make a noise finding antenna that I can take in my vehicle to look for a source of noise on 160m and 80m bands. My google searches have not yielded much information on something I can use on these bands or what I found was not clear to me on how to make one. My plan would be to make something and then use my mobile setup to drive and try to find the source.
>
> Please any recommendations will be highly welcome.
>
> What I do believe is that its something that gets turned on in the night hours as its not there during the day and there are times at night when it goes away.
>
> Thank in advance for your help.
>
> Cheers
> Don
>
>
> ~73
> Don
> KD8NNU
> 2014 3905CC Top Gun :-)
> -.- -.. ---.. -. -. ..-
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
More information about the Topband
mailing list