Topband: Help installing compression connectors

[Phil Duff]

I forgot to include the part number of the red sleeve connectors -  SNS1P6U

73 NA4M


On Nov 17, 2014, at 3:06 PM, Phil Duff <na4m at suddenlink.net> wrote:

> There are different SNS F connectors. The SNS connectors will have different sleeve colors depending on application.
> 
> http://www.tnb.com/pubint/docs/snapnseal.pdf
> 
> I use the red sleeve connectors on flooded double shielded Commscope RG6.  Using the recommended stripping and compression tool and fold the braid back and it goes on easily and fits fine.
> 
> 73 Phil NA4M
> 
> 
> 
> On 11/17/2014 14:44, Tony K1AMF wrote:
>> Anyone have any suggestions on how to install compression connectors on flooded RG6 quad shield coax with PE jacket?   I'm using Belden Snap-N-Seal RG6QS compression connectors but they're nearly impossible to slip on far enough.  I've tried removing the outer  braid and foil and still no luck.  Maybe I should be using different connectors?  The coax I'm using for the beverage is Commscope F6SSEF / 4561804.
> 
> -- 
> Phil Duff
> Georgetown, TX
> 
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband

-. .- ….- --
Phil Duff          na4m[at]suddenlink.net