Topband: Two wire beverage , some questions

[Martin]

Topbanders,
i'm preparing DL0WH for the upcoming contests and will replace the 
single wire na-beverage with a two wire reversible beverage using 
twisted wire.

According to http://www.w0btu.com/Beverage_antennas.html the feedline 
shields should be kept seperated at the feedpoint.

Questions:

Should they be kept seperated at the shack end also, like the unused 
feedline not connected to anything?

Should i terminate the unused feedline at the shack end  and/or at the feed?


If i use only one feedline, should i disconnect both output wires of the 
unused transformer?

Or should i terminate the unused transformer?


Thanks in advance.


-- 

Ohne CW ist es nur CB..

73, Martin DM4iM