Topband: TX relays

[Jeff Blaine]

There is some data on this page:

http://www.w0qe.com/Technical_Topics/small_signal_relays_at_rf.html

I have used the RTD140xx series Schrack/Tyco for years in primarily RTTY 
contesting duty at the KW power level - all without fail.  But I have not 
conducted BDV testing on those relays.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Jim Brown
Sent: Thursday, October 09, 2014 12:38 PM
To: topband at contesting.com
Subject: Re: Topband: TX relays

On Thu,10/9/2014 6:46 AM, Tom W8JI wrote:
> Because there are many things that go into relay selection that do not 
> show on a data sheet, I always dissect and test relays.

Thanks for an excellent exposition of the issues. Now how about the
other half of the question -- part numbers for relays that meet the
need? This reflector (and the spirit of ham radio) is about SHARING
information.

73, Jim K9YC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband