Topband: Fwd: Re: [Bulk] alternative feedpoint capacitor

Herbert Schoenbohm herbs at vitelcom.net
Mon Aug 3 07:15:21 EDT 2015






Those little Mica's need to handle a lot of current so unless you want
them to explode with a bang I would put enough small values in parallel
to come up with the needed series capacitance.  The best solution is a
vacuum variable but that is some money if you get one with flanges for
mounting. Before I got mine here I used a calculated length of LMR-400
made into a coax capacitor and coiled up at the base of the tower The
capacity per foot varies but is published and can work.  But I like the
flexibility of a vac in the tuning box.  Bread slicers are my last choice.

The other solution is to get a nice G2 mica at a higher value than you
need (any value) and put a tapped coil in series with it to make it
variable.  Preferably a flat wound coil and tap like are used in
broadcast ATU's.

Herb Schoenbohm, KV4FZ

On 8/2/2015 8:30 PM, Grant Saviers wrote:
> I found NOS Soviet block screw mount micas on ebay that looked like
> they would handle QRO and have three pairs in series to cover the band
> with shorting relays - all shorted = 1820 then each step (2 short, 1
> short, all open) adds 50KHz.  85' to top, 2x 30' hat and 8 10'
> elevated 125' radials.  So far no problems.  Relays are PCB 8a, 5KV
> coil isolation, they only see 350v or so and never hot switch. Ok so
> far, up 2 years but I think the top is a little too close to the
> tree.  The tree guy will fix that next visit.
>
> Grant KZ1W
>
> On 8/2/2015 17:10 PM, Steve Flood wrote:
>> My top-loaded vertical needs a series 260pF capacitor at the
>> feedpoint to
>> match the 53 + j335 impedance (1.825 MHz) to my coax feed.
>>
>> I have a few different air-variables I could use, but I was wondering
>> what
>> sort of fixed capacitors would be suitable in this application.
>>
>> Max power is 1500w.  I have doorknob caps but they don't have current
>> ratings marked on them.
>>
>>
>> Thanks,
>>
>> Steve KK7UV
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> _________________
>> Topband Reflector Archives - http://www.contesting.com/_topband
>>
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband





More information about the Topband mailing list