Topband: beverage resistors at Mouser.com

[Jeff AC0C]

If you are going to make the order, consider using several in parallel to 
improve the surge handling capability.  I use 6x 2700 ohms here.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Jorge Diez CX6VM
Sent: Monday, December 28, 2015 12:53 PM
Cc: 'topband'
Subject: Re: Topband: beverage resistors at Mouser.com

Thanks all for the help, very useful information



Happy New Year!



73,

Jorge

CX6VM/CW5W



De: Mike Waters [mailto:mikewate at gmail.com]
Enviado el: lunes, 28 de diciembre de 2015 03:15 p.m.
Para: Jorge Diez CX6VM
CC: topband
Asunto: Re: Topband: beverage resistors at Mouser.com



Jorge,

Those might work, although they might be inductive (but probably not enough 
to matter at 160m) and might not have the surge rating that the Ohmite OY 
resistors have. But I am not sure.

The ones below are the ones everyone uses. However, the 2W 470 ohm type OY 
appear to be out of stock. The ones below should work fine.


588-OY-470-E 
<http://www.mouser.com/ProductDetail/Ohmite/OY471KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM0AL619UxluYs%252bchll6qvbU%3d>

588-OY-390-E 
<http://www.mouser.com/ProductDetail/Ohmite/OY391KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM9UfS4H1uSv96z622JnjmoY%3d>

588-OX-470-E 
<http://www.mouser.com/ProductDetail/Ohmite/OX471KE/?qs=sGAEpiMZZMvmQ%252bOLa8n%2fM0AL619UxluYHfapLNvkuuU%3d>

73, Mike

www.w0btu.com



On Mon, Dec 28, 2015 at 11:31 AM, Jorge Diez CX6VM <cx6vm.jorge at gmail.com> 
wrote:

I am looking for beverage resistors, I think 470 ohms 2 watts will be OK, 
right?

In mouser.com I found 660-MOS2CT52R471J  and 660-MOS2C471J

Which one is better? Or maybe another part number that you know?





---
El software de antivirus Avast ha analizado este correo electrónico en busca 
de virus.
https://www.avast.com/antivirus
_________________
Topband Reflector Archives - http://www.contesting.com/_topband