Topband: beverage pols

[Tom W8JI]

Don't worry.

There is nothing detrimental at all even with the metal poles just a few mm 
from the antenna.

As long as the wire is insulated from the pole, no change or effect can be 
observed.

73 Tom



----- Original Message ----- 
From: "dl8yhrfrank--- via Topband" <topband at contesting.com>
To: <topband at contesting.com>
Sent: Thursday, February 05, 2015 5:11 PM
Subject: Topband: beverage pols


> Hi all
> i woud like to set my? Beverages from 1m high to 2.5m high..some told me 
> it will improve them
> So now i need new pols to hold the wire
> I thought about 1m Aluminiumtube? in the ground and inside that pol a 2m 
> peace of tropicwood..so distance from Alumminiumpol to the finaly 
> Beveragewire shoud be arround 1 to 1.5m...annyone has experence if that is 
> enoug distance?Though about only woodpols but in wet ground it will not 
> survive vy long...
> Vy 73
> Frank
> DL8YHR.de
>
>
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4800 / Virus Database: 4257/9061 - Release Date: 02/05/15
>