Topband: fixing beverage

donovanf at starpower.net donovanf at starpower.net
Mon Nov 23 16:50:49 EST 2015


Hi Frank, 


My TDR is nearly fifty years old, but still it works great. 


Array Solutions sells more modern multi-functions devices 
that are perform very well as a TDR. Here's an example display 
from Array Solutions' web site: 


https://www.arraysolutions.com/images/AIMuhf-TDR-fig1.png 


The display for a Beverage looks very similar, you can see every 
component from the shack to the termination resistor. 


73 
Frank 
W3LPL 


----- Original Message -----

From: dl8yhrfrank at aol.com 
To: donovanf at starpower.net 
Sent: Monday, November 23, 2015 9:20:55 PM 
Subject: Re: Topband: fixing beverage 

where can i get such toy? 






-----Ursprüngliche Mitteilung----- 
Von: donovanf <donovanf at starpower.net> 
An: TopBand List <topband at contesting.com> 
Cc: Jorge Diez - CX6VM <cx6vm.jorge at gmail.com> 
Verschickt: Mo, 23 Nov 2015 9:39 pm 
Betreff: Re: Topband: fixing beverage 





A Time Domain Reflectometer is one of the best tools to verify 
the proper performance and isolate faults of a Beverage and many 
other types of antennas. 


In the case of a Beverage, the TDR allows you to see every 
component of the antenna system from the ham shack all the way 
to the termination resistor. If anything fails you can almost 
always walk directly to it with the needed replacement parts and 
tools in hand. 


73 
Frank 
W3LPL 

----- Original Message ----- 

From: "Jorge Diez - CX6VM" < cx6vm.jorge at gmail.com > 
To: "TopBand List" < topband at contesting.com > 
Sent: Monday, November 23, 2015 8:29:15 PM 
Subject: Re: Topband: fixing beverage 

Thanks all you guys for the help 

Will do this tests and see what is wrong 

73, 
Jorge 
CX6VM/CW5W 

-----Mensaje original----- 
De: Tom W8JI [ mailto:w8ji at w8ji.com ] 
Enviado el: lunes, 23 de noviembre de 2015 02:35 p.m. 
Para: Jorge Diez - CX6VM; 'TopBand List' 
Asunto: Re: Topband: fixing beverage 

> 
> I notice that my USA beverage is lower in 3-4 S units that some weeks ago. 
> 

5-20 dB. Depending on receiver and where it is at on the S meter. 

That has to be a poor connection, open, or short between the receiver and the 
Beverage transformer end of the Beverage. It cannot be at the termination end. 


> At simple view all seems to be OK. I think the coax is not the 
> problem, because if I have a problem in the coax, will be completely deaf, 
right? 

No. Coax can do this. It happens all the time. Especially at connectors. 

> 
> So this can be the cause of a problem in the end resistor or maybe in 
> the transformer? I use in this beverage a WX0B beverage boxes 
> 

It can not be at the end resistor termination. 

The problem is if you disturb something it will often start working. You need to 
carefully check one thing at a time. Many times, if not most times, this is 
corrosion or tarnish on the center pin of the coax. Sometimes it is a broken 
wire, or a bad part from lightning or water. 

The best way to test it is with an SWR meter and do a frequency sweep from the 
house, before you touch the antenna or any outside connections. The frequency of 
either adjacent major dips in SWR or impedance will allow you to calculate 
exactly where the problem is. The MFJ analyzer will do this within a few feet, 
even on a 1000 foot cable, by using distance to fault. 

73 Tom 


--- 
El software de antivirus Avast ha analizado este correo electrónico en busca de 
virus. 
https://www.avast.com/antivirus 

_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 
_________________ 
Topband Reflector Archives - http://www.contesting.com/_topband 





More information about the Topband mailing list