Topband: radial plate height

[Jorge Diez - CX6VM]

Thanks very much Frank!

73,
Jorge


-----Mensaje original-----
De: donovanf at starpower.net [mailto:donovanf at starpower.net] 
Enviado el: lunes, 28 de septiembre de 2015 12:16 p.m.
Para: Jorge Diez - CX6VM
CC: 'TopBand List'
Asunto: Re: Topband: radial plate height

Hi Jorge,

one degree of phase on 160 meters is 18 inches.   Any dimension less
than 18 inches will have no significant affect on 160 meters.   Your
ground platew will work perfectly at 5 inches high

73
Frank
W3LPL


----- Original Message -----
From: Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
To: 'TopBand List' <topband at contesting.com>
Sent: Mon, 28 Sep 2015 11:07:09 -0400 (EDT)
Subject: Topband: radial plate height

Hello

 

I am installing a DXE radial plate in the base of a vertical.

 

My doubt is if the heigh affect in something the performance.

 

I have it at 5 inches from ground, easy to work with it installing the radials on the plate with nuts and bolts

 

Is any problem? It must be lower near the ground or not problem to have it at 5 inches from ground?

 

Thanks,

Jorge

CX6VM/CW5W



---
El software de antivirus Avast ha analizado este correo electr nico en busca de virus.
https://www.avast.com/antivirus
_________________
Topband Reflector Archives - http://www.contesting.com/_topband


---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus