Topband: aluminum "penetrating oil"

[Clive GM3POI]

Rod, The best type I have come across is PB Blaster (made in Ohio), best
left overnight in difficult situations and another spray in the morning.
73 Clive GM3POI

-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Roger
Graves
Sent: 01 August 2016 22:51
To: topband at contesting.com
Subject: Topband: aluminum "penetrating oil"

I need to separate KLH 3 inch aluminum boom sections. When assembled 20
years ago I used Penetrox on them so hopefully they are not welded together.
In fact one of them separated 1/2 inch then stuck. Would there be a
"penetrating oil" that would help to free/lubricate these joints to make the
separation easier?

Thanks and 73,

Rod, VE7VV


_________________
Topband Reflector Archives - http://www.contesting.com/_topband