Topband: Using RG-6 as elements wire for 2 wire beverage?

[Paul Baldock]

Thanks for all the pointers. I have the info I need now.

- Paul KW7Y


At 12:08 PM 8/22/2016, KD0Q wrote:
>The ON4UN Low Band DXing book talks about a 
>reversible beverage using coax as the antenna element..
>
>Glenn, KD0Q
>
>On Mon, Aug 22, 2016 at 11:26 AM, Warren Merkel 
><<mailto:hullspeed21 at gmail.com>hullspeed21 at gmail.com> wrote:
>Paul,
>
>I built my own modules, implementing a reversible, stretchable BOG using
>RG-6.  See my <http://QRZ.COM>QRZ.COM page for 
>module diagrams.  BOG or Beverage, the
>reversing concepts are similar.
>
>Warren, KD4Z
>
>
> > Date: Sun, 21 Aug 2016 16:36:19 -0700
> > From: Paul Baldock <<mailto:paul at paulbaldock.com>paul at paulbaldock.com>
> > To: <mailto:topband at contesting.com>topband at contesting.com
> > Subject: Topband: Using RG-6 as elements wire for 2 wire beverage?
> >
> > Has anybody used RG-6 as the antenna element(s) wire for a reversible
> > beverage? Do you have any design info?
> >
> > Thanks
> >
> > - Paul  KW7Y
>
>_________________
>Topband Reflector Archives - 
><http://www.contesting.com/_topband>http://www.contesting.com/_topband
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus