Topband: : Re: 1 center point to ground all 8 beverages??
Filipe Lopes
ct1ilt at gmail.com
Sun Mar 27 17:53:21 EDT 2016
Hello Frank
Thank you for your email, just one more question.
Do you put the relay directly at each antenna wire or do you just connect
the ground to a common point and you select and deselect the antenna you
want to be connected to ground?
73s Filipe CT1ILT
Sent from my Huawei Mate 8
Em 22/03/2016 4:12 p.m., <donovanf at starpower.net> escreveu:
> Hi Felipe,
>
> As W4ZV noted in his posting, three meter ground rod spacing was
> not enough when he brought multiple Beverages to a common point.
>
> A much better solution is to use inexpensive hermetically sealed
> relays to connect only the selected Beverage to a single ground rod.
>
> 73
> Frank
> W3LPL
>
> ------------------------------
> *From: *"Filipe Lopes" <ct1ilt at gmail.com>
> *To: *"k1fz" <k1fz at myfairpoint.net>, "topband" <topband at contesting.com>
> *Sent: *Tuesday, March 22, 2016 1:17:51 PM
> *Subject: *Re: Topband: : Re: 1 center point to ground all 8 beverages??
>
> what about 7 ground rods 20cm apart, will it do ?
>
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M
>
> 2016-03-22 14:09 GMT+01:00 K1FZ-Bruce <k1fz at myfairpoint.net>:
>
> >
> > ----- Forwarded message from K1FZ-Bruce -----
> >
> > Date: Tue, 22 Mar 2016 09:04:06 -0400
> > From: K1FZ-Bruce
> > Reply-To: k1fz at myfairpoint.net
> > Subject: Topband: Fwd: Re: 1 center point to ground all 8 beverages??
> > To: Topband
> >
> > I agree. We have been thinking of switching at the coax cable location.
> > Will need to correct my Beverage notes page.
> >
> > The W4ZV and W3LPL method will work.
> >
> > 73
> > Bruce-K1FZ
> >
> > www.qsl.net/k1fzbeverage_antenna.html
> >
> > http://www,qsl.net/k1fz/beverage_antenna.html
> >
> >
> > ----- Forwarded message from Bill Tippett -----
> >
> > Date: Tue, 22 Mar 2016 05:19:48 -0400
> > From: Bill Tippett
> > Reply-To: Bill Tippett
> > Subject: Re: Topband: 1 center point to ground all 8 beverages??
> > To: topband
> >
> > W3LPL:
> >
> > >Another solution is to use
> > relays to connect only the selected Beverage to the ground rod
> > and disconnect the other seven.
> >
> > I've done this for 31 years from 3 different locations with no problems.
> > From a 2011 post on this subject:
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> >
> > ----- End forwarded message -----
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
More information about the Topband
mailing list