Topband: FW: 80 meter 4-Square verticals

[Mike Smith VE9AA]

Hi Darrel, 

 

No, it's a mish mash of oddly shapen all wire inverted L's in the woods.

The ends do not point at each other at all.  Viewed from above, the entire
mish mash of wires and 2 raised radials/per would look almost like a perfect
square.

 

 

 

Mike, Coreen & Corey

Keswick Ridge, NB

 

From: AB2E Darrell [mailto:ab2e at hotmail.com] 
Sent: February 12, 2018 7:23 PM
To: Mike Smith VE9AA; topband at contesting.com
Subject: Re: Topband: 80 meter 4-Square verticals

 

Mike, 
Is your 80m 4square like the ON4UN with the L pointing towards each other. I
was reading his book the other night. Great stuff.
73
Darrell AB2E 

  _____  

From: Topband <topband-bounces at contesting.com> on behalf of Mike Smith VE9AA
<ve9aa at nbnet.nb.ca>
Sent: Monday, February 12, 2018 6:02:30 PM
To: topband at contesting.com
Subject: Re: Topband: 80 meter 4-Square verticals 

 

          Terry, 

 

I think Bill KH7XS just went through this exercise.

That said, my (Comtek) 80m 4-square is made 100% from wire and hung in the
woods as inverted L's.

Raised radials.

 

Seems to work.  Electrons don't (really) care if you use $1000 worth of
aluminum or $100 of used wire.

 

Mike VE9AA

 

Mike, Coreen & Corey

Keswick Ridge, NB

Hi  Folks,

 

 

I've decided to get serious and try to put up an 80 meter 4-Square around my


117' tower of Rohn 55. Getting into my place can be a VERY SERIOUS CHALLENGE
to 

any tandem rig so that may make getting 40' long 3" and 2" irrigation tubing


difficult to deliver. I've got new steel racks on my 3/4 ton Dodge pickup
but I 

think the best I can do in length is about 25' or so. Has anyone come up
with a 

better method to build some 80 meter 1/4 wavelength verticals that won't
cost a 

ton of bucks?  There is also the problem of going from 3" to 2" tubing with
a 

conductive joint. Probably will just see if the local supplier can deliver
them 

and let them deal with that busy narrow road. 

 

 

I'm going to be elevating the verticals about 10' up  with elevated radials
per 

some of the info in 'Low Band DXing'. Thought  about using wire verticals
but 

would like something a bit more substantial. Do need something that can give
me 

some serious help on that band.

 

 

Any help?

 

 

Terry

 

_________________
Topband Reflector Archives - http://www.contesting.com/_topband