Topband: Beverage Antenna Tuning

[Lloyd - N9LB]

Hello Ash!

For a broadband RX antenna, that match looks good.  Exactly what I see with
my AIM analyzer when looking at my BOGs.  Don't mess with it.

73

Lloyd - N9LB

-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Ashraf
Chaabane
Sent: Wednesday, July 04, 2018 9:13 AM
To: topband at contesting.com
Subject: Topband: Beverage Antenna Tuning

Hi All

I measured the SWR in my beverage antenna; the SWR fluctuates between 1.5
and 3 in a range of 1.8 to 7 MHz. (See:
https://drive.google.com/drive/folders/0B9AtNpPfAOUMRDNsaXROMG1VUTg?usp=shar
ing
)
I know SWR should not vary too much. However, some people are suggesting
adjusting the termination resistor. Others suggest checking the transformer
number of windings for a good match. What shall I do?

73 Ash 3V8SS/KF5EYY
_________________
Topband Reflector Archives - http://www.contesting.com/_topband